ChangeLog Xcrono
CHANGES from 1.07 to 1.08 02/10/2017
- Fixed data type "waiting time zones" and "pump Advance" - by pressing the numeric keys representing the value for 10
- New setting to have the ability to define a port other than 80 on which the web server responds
- As a consequence updated s / w on the remote server to manage everything
- Added ability to change the clock (only hours and minutes) from the web server
- Added RTC calibration based on the type of hardware (with or without Ethernet)
- Updated USB host library - MSC
- Updated file system
CHANGES from 1.6 to 1.07 10/03/2016
- Fixed access password-protected settings sets - as below but for the periods settings
CHANGES from 1.05 to 1.06 08/06/2016
- Fixed access password-protected settings sets (after entering the password always pointed to the first zone settings)
- Improved management of external EEPROM (new chip Clock <10Mhz)
CHANGES from 1:04 to 1:05 12/15/2015
- Fixed access password-protected settings sets (not asked pswd)
- Fixed access system settings (single) moving from password required
CHANGES from 1.03 to 1.04 12/01/2015
- Fixed buffer overflow in the event of failure of the server address resolution "www.xcrono.it"
- Fixed rain sensor vision of the web server
- Fixed manual watering cycle start if the day is not planned
- Changed data type of "delay and advance group" (from - / + 300 to - / + 900)
- Improved ethernet connection management (link_down / link_up on error)
- Improved performance of web temperature when HXSP anomaly (-? -)
CHANGES from 1.02 to 1.03 22/04/2015
- Access the web server via the cloud
CHANGES from 1.01 to 1.02 24/02/2015
- Completed web server
- Added English
CHANGES from 1.00 to 1.01 12/15/2014
- Improved selection screen check-control (weather, readers, etc.)
- On the web server for the part climate (vision and password setting)